Slide Mounting Media
Newcomer Supply Mount-Quick Mounting Media, 30cc tube. Excellent for tissue section transfer from one slide to another.
Xylene Soluble Mounting Medium, 30cc tube Packaging allows maximum control during coverslipping. Fast drying. Clear. UNIQUE AS A TISSUE TRANSFER MEDIUM. Manufactured by Daido Sangyo Co. Ltd.
Newcomer Supply Mount-Quick Aqueous Mounting Media, 30cc
Newcomer Supply Mount-Quick Aqueous is a ready-to-use liquid mounting medium for histological techniques requiring an aqueous based mounting medium solution and/or when dehydrating and clearing agents will adversely affect the stain, such as: lipid/fat stains, crystal violet stains and solvent soluble immunoperoxidase chromogenic procedures. Mount-Quick Aqueous mounting medium is not recommended for use in immunofluorescence procedures.
Enzo Life Sciences SEEBRIGHT Mounting Medium (10ml)
SEEBRIGHT Mounting Medium is an antifade reagent that minimizes photobleaching. Use of this mounting medium significantly extends the lifetime of fluorescent signals. Quantity: Each vial of SEEBRIGHT Mounting Medium contains 10 mL sufficient for 1000 tests (ENZ-GEN-420-1000). Apply mounting medium to the sample area as desired. Long Term Storage: +4°C. Applications: IF, Fluorescence microscopy, Fluorescent detection FISH.
Electron Microscopy Sciences EUKITT 4400 LB Resin 500 ML
EUKITT 4400 LB is a single-component resin that polymerizes under UV light was specially developed for thin ground sectioning technology. It completely passes through hard and soft tissue and is used for embedding and preparing of sections for medical and technical applications. It is characterized by crystal-clear optics with a favorable refractive index, good fluidity and low shrinkage.
The hardening of the embedding medium is done by UV light of a wavelength of 365 nm with 2 x 9 W. The exposure takes place from two sides. During the exposure within the given time (see instruction manual/operating instructions) temperatures of 50°C will not be exceeded.
Fast staining is possible with all known methods, and with the same high quality.
EUKITT EMS 4400 LB does not contain monomers, therefore the vapour pressure is very low. As a consequence the user is not bothered by intense, toxic smell.
Vector Laboratories VectaMount™ AQ Mounting Medium 60 ml
VectaMount™ AQ Mounting Medium is a hardsetting mounting medium developed for use with enzymatic substrates, such as AEC, ImmPACT™ AEC, and ImmPACT™ AMEC Red, whose reaction products are soluble in alcohol or other organic solvents. In applications where aqueous mounting is preferred, VectaMount™ AQ is suitable for use with other substrates such as DAB, Vector SG, BCIP/NBT, Vector Red, ImmPACT™ Vector Red, Vector Blue, ImmPACT™ DAB, ImmPACT™ DAB EqV, and ImmPACT™ SG. VectaMount™ AQ is simple to use, requires no mixing, and preserves the color and clarity of the substrates. Stained sections mounted with VectaMount™ AQ can be stored in a slide box at room temperature for at least 2 years without fading.
Aat Bioquest FluoroQuest Anti-fading Mounting Medium with DAPI (20 mL)
FluoroQuest with DAPI is an aqueous mounting medium for preserving fluorescence of tissue and cell smears. This catalog is for 20 mL.
Electron Microscopy Sciences SEM Low Voltage Resolution Specimen Gold on Carbon, Hitachi Stub
Larger gold particles in this test allow for a higher contrast and smaller gaps allow resolution to be measured. This helps to make the test easier to use when operating conditions are not optimal.
Type: Hitachi Stub
Electron Microscopy Sciences SEM Medium Resolution Au on Carbon Test Specimen, Hitachi Stub
Larger gold particles in this test with wider gaps, allow for structured microscope setup. Magnification range is 800-10,000x.
Type: Hitachi Stub
Electron Microscopy Sciences SEM Mount Hitachi M4 1" Plain Surface, 1/4" height, Aluminum
Hitachi cylinder mount has a M4 tapered hole with female thread. Made from lathe finished ultra-pure aluminum. M4 tapered hole.
Head: 1"
Height: 6 mm
Electron Microscopy Sciences Citifluor™ Mountant Solution CFM-1 Plus, Glycerol Based, Non Hardening 25 ML
Citifluor mounting medium for immunofluorescence is designed to reduce the fading of the fluorescence of dyes used for labeling biological specimens. In the technique of fluorescence microscopy, the fluorescence is stimulated by high intensity UV and/or visible light. Absorption of the light populates an excited state of the dye (usually a singlet state) and this leads to fluorescence. However, the excited state of the dye may undergo chemical reaction, which leads to destruction as evidenced by the fading of the fluorescence and consequent loss of the image. Glycerol-PBS buffered solution with a refractive index of ~1.52. With anime antifadent.
Material: Glycerol Based
Type: Non Hardening
ABBERIOR INSTRUMENTS AMERICA LLC MOUNT LIQUID ANTIFADE
abberior MOUNT LIQUID ANTIFADE is an aqueous mounting medium designed for 3D confocal and superresolution microscopy. The refractive index is identical to that of many biological samples (n = 1.38). abberior MOUNT LIQUID ANTIFADE is not hardening after embedding of specimen, to exclude changes of the 3D structure of samples during the hardening process.abberior MOUNT LIQUID ANTIFADE prevents photobleaching and preserves the signal of fluorescent labels. For scientific use only. Must not be used for diagnostic or medical purposes.
Electron Microscopy Sciences Slide Coating Adhesive 100 ML
Prepared from 3-aminopropyltriethoxysilane in acetone. Good for coating glass slides to adhere paraffin sections for further processing without sections falling off from the slide. READY TO USE.
AdipoGen DAPI 2HCl Solution 10mM water
Chemical. CAS 28718-90-3. Formula C16H15N5 . 2HCl. MW 350.25. DAPI 4,6-Diamidino-2-phenylindole dihydrochloride is a cell permeable, fluorescent dye that is a minor groove-binding probe for DNA. Binds to the minor groove of double-stranded DNA preferentially to AT rich DNA, forming a stable complex which fluoresces approximately 20 times greater than DAPI alone. DAPI is several times more sensitive than ethidium bromide for staining DNA in agarose gels. It may be used for photofootprinting of DNA, to detect annealed probes in blotting applications by specifically visualizing the double-stranded complex, and to study the changes in DNA and analyze DNA content during apoptosis using flow cytometry. DAPI staining has also been shown to be a sensitive and specific detection method for mycoplasma. Spectral Data Excitation lambdaex 340 nm Emission lambdaem 488 nm only DAPI. Excitation lambdaex 360nm Emission lambdaem 460nm DAPI-DNA complex.
Vector Laboratories Vibrance Antifade Mounting Medium, 2ml
VECTASHIELD Vibrance is an aqueous mountant that sets at room temperature. Slides are viewable within one hour after mounting and can be stored at room temperature for extended periods, without loss of signal intensity, retraction of media or bubble formation. VECTASHIELD Vibrance Antifade Mounting Media provides excellent protection against fading across the visible spectrum, even under far-red wavelengths. It are compatible with most commercially available fluorophores. Features: Superior antifade/anti-photobleaching properties across the spectrum, Compatibility with commonly used fluorophores, View sections one hour after mounting, No tone or autofluorescent background, even after curing